Inorganic Stain Removal – Pool Calcium, Oil & Rust

Struggling with stubborn calcium deposits, oil stains, or rust that won’t come off? Most pressure washing companies can’t handle these but we specialize in it. Our advanced techniques safely remove even the toughest inorganic stains without damaging surfaces.

20210803 180248176 ios.jpg

What Kind of Stain Do You Have?

Stains come in many forms, and each requires a specific approach for safe, effective removal. White, crusty buildup is likely calcium from hard water, commonly found on pool tiles and fountains. Dark, slick patches are usually oil or grease, often seen on driveways and parking lots. Rust stains appear as reddish-brown streaks and typically stem from metal corrosion. Using the wrong cleaning method can set stains permanently or damage surfaces that’s why we tailor our process to your stain type. Not sure what you’re dealing with? Send us a photo, and we’ll diagnose it for free.

The Toughest Stains - And Why Most Pressure Washers Can't Handle Them

Most pressure washing companies avoid the toughest stains because they lack the specialized knowledge, industrial-grade chemicals, and precision techniques required to remove them safely. But where others see a problem, we see an opportunity—hardened calcium deposits that ruin pool surfaces, deep-set oil stains that won’t budge, and rust that spreads if treated improperly aren’t just stains to us; they’re our specialty. We’ve invested in professional-strength solutions and engineered custom pressure adjustments to eliminate what most companies walk away from. When you’ve been told “it can’t be cleaned,” that’s when we prove them wrong permanently restoring surfaces others claim are beyond repair.

austin texas pool tile cleaning
Inorganic Stain Removal – Pool Calcium, Oil & Rust

Tired of Being Told Your Stains 'Can't Be Cleaned'?

We prove the impossible possible every day. Our stain removal experts are ready to tackle what others refuse – with guaranteed results.

Contact us for a free quote or give us a call at (512) 662-8422

Why Professional Inorganic Stain Removal Matters​

Left untreated, inorganic stains don’t just look bad – they actively degrade your property. Calcium deposits etch into pool tiles, oil stains break down asphalt, rust spreads like a virus, and hard water stains permanently discolor surfaces. Most homeowners and property managers waste money on temporary fixes or incorrect cleaning methods that worsen the problem. These aren’t cosmetic issues – they’re structural threats that lower property value and accelerate wear. The longer you wait, the more expensive the damage becomes. Professional removal isn’t a luxury; it’s preventative maintenance that saves thousands in repairs.

Surface Erosion

Calcium and rust chemically bond to materials, causing pitting and permanent damage

Stain Migration

Oil and rust seep deeper over time, expanding the affected area

Health Hazards

Bacterial growth in oil stains; rust particles contaminating water features

Value Loss

72% of appraisers note stain damage reduces property valuations

THE SOLUTION?
Restore Your Surfaces to Pristine Condition – Permanently

We engineered solutions for every one of these problems. Our industrial-grade chemical treatments dissolve mineral deposits without etching surfaces. Hot-water extraction removes oil at the molecular level. Rust inhibitors stop metallic oxidation permanently. And unlike standard pressure washing, our methods actually restore rather than further damage your property’s integrity.

Eliminate eye-sore stains, prevent permanent surface damage, and protect your property value with professional grade stain removal.
Our proven methods don’t just clean they renew and preserve your investment

Testimonials

Exceptional service and outstanding results. Austin’s top choice for residential and commercial pressure washing. They truly stand by their promise when they clean it, they mean it! No stain is too tough, and no surface is beyond restoration. Highly recommend.

Get Answers to Common Inorganic Stain Removal Questions

Frequently Asked Questions

Calcium buildup is caused by hard water. When water evaporates, it leaves behind mineral deposits like calcium and magnesium. Over time, these deposits harden into thick, white, chalky stains especially around pool waterlines, fountains, and areas exposed to sprinklers or standing water.

Standard pressure washing alone won’t remove calcium deposits. In fact, using too much pressure can damage tile, grout, or stone surfaces. That’s why we use a specialized multi-step process that safely dissolves and lifts the buildup without causing surface damage.

No. We take extra care to match the cleaning method to your surface type. Whether it’s delicate pool tile, natural stone, or concrete, our process is non-damaging, highly effective, and proven safe.

Most jobs are completed in just a few hours, depending on the size of the area and severity of the buildup. We’ll give you a clear estimate up front so you know what to expect.
No but it does become harder to remove the longer it sits. The sooner you treat it, the better the results. Our process is designed to fully restore most affected surfaces.
Absolutely. As Austin’s leading inorganic stain removal specialists, we don’t just promise results—we guarantee them. If your surface can be restored, we’ll restore it better than any other pressure washing company in Central Texas. Our team won’t stop until the job is done right, because in Austin’s tough climate (hard water, extreme heat, and seasonal moisture), we know what it takes to deliver lasting results that others can’t match.